Electric Linear Actuators: Every Type We Make
Purlin electric linear actuators turn a DC motor's rotation into straight push-pull motion. One power cable, no compressor or oil, and they hold position when power is off.
- 100 N to 8,000 N force
- 3 to 400 mm/s speed
- Strokes from 50 mm to 1,500 mm

01Compact electric linear actuator
Short, slim actuators for machines and products where every millimetre counts. Full push-pull performance in a small body.
- Short retracted length
- Strokes 50–300 mm
- 24VDC with limit switches
02Heavy-duty electric linear actuator
High-force actuators for lifting, pressing and positioning heavy loads in machines, platforms and outdoor equipment.
- Up to 8,000 N
- Strokes up to 1,500 mm
- Self-locking under load
03Miniature electric linear actuator
Our lightest actuators for small mechanisms: flaps, latches, small doors and product prototypes.
- From 100 N
- Fast light-duty motion
- Small, easy to mount
Recommended Purlin products
PAI-16-V3-48mm/sec100 N · 48 mm/s · 50–400 mm
PAI-36-V5-80mm/sec100 N · 80 mm/s · 50–300 mmWeatherproof electric linear actuators
Actuators for outdoor equipment such as solar trackers, gates and vents. Standard units are IP54; mount them sheltered and rod-down for long outdoor life.
- IP54 protection as standard
- Outdoor mounting guidance
- High force for wind loads
Recommended Purlin products
PAI-01-V1-3mm/sec6000–8000 N · 3 mm/s · 50–1500 mm
PAI-01-V2-7mm/sec4000 N · 7 mm/s · 50–1500 mm
05High-speed electric linear actuator
Fast-moving actuators for quick open/close actions, pushers and diverters, up to 400 mm per second.
- Up to 400 mm/s
- Light to medium loads
- Fast cycle response
06Precision linear actuator
For applications that need repeatable positions, such as adjustable fixtures and test rigs. Combine a steady-speed actuator with position feedback and a controller.
- Repeatable stops with feedback
- Steady, smooth travel
- Works with PLC and microcontroller control
Recommended Purlin products
PAI-01-V4-14mm/sec2000 N · 14 mm/s · 50–900 mm
PAI-01-V5-20mm/sec1300 N · 20 mm/s · 50–900 mm
07DC electric linear actuator
All Purlin actuators run on safe, low-voltage 24VDC. Reverse the polarity to reverse the direction; simple to wire to a switch, relay or controller.
- 24VDC (12VDC on request)
- Simple two-wire direction control
- Battery and solar friendly
08Guided linear actuator
When the load pushes sideways on the rod, add external guides or rails so the actuator only carries straight push-pull force. We help you design the mounting.
- Protects the rod from side loads
- Longer life in machines
- Mounting design support
Recommended Purlin products
PAI-01-V3-10mm/sec3500 N · 10 mm/s · 50–900 mm
PAI-36-V1-8mm/sec8000 N · 8 mm/s · 50–300 mm
09Limit-switch linear actuator
Every Purlin actuator has inbuilt limit switches that stop the motor automatically at both ends of the stroke, so your mechanism is never over-driven.
- Inbuilt at both stroke ends
- Protects the motor and mechanism
- No extra sensors needed for end stops
Recommended Purlin products
PAI-01-V4-14mm/sec2000 N · 14 mm/s · 50–900 mm
PAI-02-V2-20mm/sec1500 N · 20 mm/s · 50/100/200/400 mm
10Smart electric linear actuator
Pair our actuators with control boxes, hand controls and feedback so they can be synchronised, remember positions or be driven by a PLC or smart-home system.
- Synchronised 2–6 actuator control
- Memory positions
- PLC and smart-home integration
Recommended Purlin products
Control Boxes2–6 channels · synchronised travel
PAI-02-V1-10mm/sec4000 N · 10 mm/s · 50/100/200/400 mmExplore other markets
Not sure which model fits?
Send us your load, stroke, speed and application. Our engineers will recommend the right actuator.
Send an inquiryTalk to an engineer
Quick answers on WhatsApp or phone, Monday to Saturday.








