Industrial Linear Actuators
Rugged electric actuators for machines, gates, solar trackers and production lines, with forces up to 8,000 N and strokes up to 1,500 mm.
- Up to 8,000 N force
- Strokes up to 1,500 mm
- Electric replacement for air and oil cylinders

01Heavy-duty electric linear actuators
Our strongest actuators for lifting, pushing and tilting heavy loads in machines, platforms and outdoor equipment.
- 6,000–8,000 N
- Strokes up to 1,500 mm
- Self-locking lead screw
02Industrial screw jack linear actuators
Like a screw jack, our lead-screw actuators lift loads and hold them firmly in place, but with a built-in motor and limit switches ready to wire.
- Lead-screw drive
- Holds load without power
- Motor and limit switches built in
Recommended Purlin products
PAI-01-V1-3mm/sec6000–8000 N · 3 mm/s · 50–1500 mm
PAI-01-V2-7mm/sec4000 N · 7 mm/s · 50–1500 mm
03Electric alternative to pneumatic linear actuators
Replace air cylinders with electric actuators where you want to stop at any position, avoid compressors and air leaks, or have no air supply.
- No compressor or air lines
- Stop at any position
- Energy used only while moving
Recommended Purlin products
PAI-36-V2-200mm/sec3000 N · 200 mm/s · 50–300 mm
PAI-17-400mm/sec200 N · 400 mm/s · 50–900 mm
04Electric alternative to hydraulic linear actuators
For loads up to 8,000 N, an electric actuator can replace a hydraulic cylinder with no pump, hoses or oil to maintain.
- No pump, hoses or oil
- Clean, low maintenance
- Up to 8,000 N
Recommended Purlin products
PAI-01-V1-3mm/sec6000–8000 N · 3 mm/s · 50–1500 mm
PAI-36-V1-8mm/sec8000 N · 8 mm/s · 50–300 mm
05Electric linear actuators
Our full range of 22 electric actuators for industrial use, from 100 N to 8,000 N and 3 to 400 mm/s.
- 22 standard models
- 24VDC, IP54
- Custom strokes
06Valve automation actuators
Open and close valves, dampers and gates in process lines, HVAC and water systems with simple electric control.
- PLC or switch control
- Holds valve position
- Compact mounting
Recommended Purlin products
PAI-36-V1-8mm/sec8000 N · 8 mm/s · 50–300 mm
PAI-01-V3-10mm/sec3500 N · 10 mm/s · 50–900 mm
07Telescopic lifting linear actuators
Telescopic lifting columns give a long lift from a short closed height, for platforms, workstations and adjustable equipment.
- 300–750 mm travel
- Up to 1,500 N per column
- Synchronised multi-column lifting
Recommended Purlin products
Lifting ColumnsUp to 1,500 N per column · 300–750 mm
Control Boxes2–6 channels · synchronised travel
08Precision positioning linear actuators
Repeatable positioning for fixtures, test rigs and adjustable tooling, using steady-speed actuators with position feedback.
- Repeatable positions with feedback
- Steady speed
- PLC integration
Recommended Purlin products
PAI-01-V4-14mm/sec2000 N · 14 mm/s · 50–900 mm
PAI-01-V5-20mm/sec1300 N · 20 mm/s · 50–900 mmRotary motion with linear actuators
Need to rotate or tilt something instead of a pneumatic rotary actuator? A linear actuator on a lever arm creates controlled rotation, as in solar trackers and tilting tables.
- Tilting and rotating via a lever
- High holding force
- Simple electric control
Recommended Purlin products
PAI-01-V2-7mm/sec4000 N · 7 mm/s · 50–1500 mm
Gear MotorsUp to 45 Nm · 12 / 24 VDC
10Servo-style linear actuators
For closed-loop positioning, combine our actuators with position feedback and a controller so they move to and hold commanded positions.
- Closed-loop position control
- Feedback-ready
- Engineering support
Recommended Purlin products
PAI-01-V5-20mm/sec1300 N · 20 mm/s · 50–900 mm
Control Boxes2–6 channels · synchronised travelExplore other markets
Not sure which model fits?
Send us your load, stroke, speed and application. Our engineers will recommend the right actuator.
Send an inquiryTalk to an engineer
Quick answers on WhatsApp or phone, Monday to Saturday.






